Great Dane GSRKA1934S User Manual download pdf (Page 39)

TROUBLESHOOTING

TROUBLESHOOTING - 37

Remove locknut (A), cap screw (B), and wheel assem-

bly (C).

Remove seals (D) and bearings (E) from wheel.

Clean and inspect bearings (E). Replace as needed.

Repack bearings with clean grease.

Install bearings (E) and wheel spacer (F) (if removed),

and new seals (D).

Install wheel assembly (C), cap screw (B) and locknut

(A).

Use a grease gun to ﬁll hub until grease just appears at

one of the seals (D).

Lower machine.

Cleaning and Repairing Plastic Surfaces

Your authorized dealer has the professional materials need-

ed to properly remove surface scratches from any plastic

surfaces, do not attempt to paint over marks or scratches in

plastic parts.

IMPORTANT: Avoid Damage! Improper care of machine

plastic surfaces can damage that surface:

Do not wipe plastic surfaces when they are

dry. Dry wiping will result in minor surface

scratches.

Use a soft, clean cloth (bath towel, diaper,

automotive mitt).

Do not use abrasive materials, such as pol-

ishing compounds, on plastic surfaces.

Do not spray insect repellent near machine.

•

Wash surface with clean water and a mild liquid auto-

motive washing soap.

Dry thoroughly to avoid water spots.

10.

Cleaning and Repairing Metal Surfaces

Cleaning:

Follow automotive practices to care for your vehicle painted

metal surfaces. Use a high-quality automotive wax regu-

larly to maintain the factory look of your vehicle’s painted

surfaces.

Repairing Minor Scratches (surface scratch):

Clean area to be repaired thoroughly.

IMPORTANT: Avoid damage! Do not use rubbing com

pound on painted surfaces.

Use automotive polishing compound to remove surface

scratches.

Apply wax to entire surface.

Repairing Deep Scratches (bare metal or primer show-

ing):

Clean area to be repaired with rubbing alcohol or min-

eral spirits.

Use paint stick with factory-matched colors available

from your authorized dealer to ﬁll scratches. Follow

directions included on paint stick for use and for drying.

Smooth out surface using an automotive polishing

compound. Do not use power buffer.

Apply wax to surface.

Troubleshooting

Using Troubleshooting Chart

If you are experiencing a problem that is not listed in this

chart, see your authorized dealer for service.

When you have checked all the possible causes listed and

you are still experiencing the problem, see your authorized

dealer.

If Check

Poor Engine

Performance

Fuel:

• Dirt in fuel system or fuel is

old. Replace fuel with fresh

stabilized fuel. Obtain fuel

from another supplier before

suspecting machine problems.

Suppliers blend fuels differently

and changing suppliers will

generally solve any performance

problems.

• Fuel blended with alcohol or ether

may contribute to performance

problems by causing gum and

varnish deposits, especially if

fuel is stored for several weeks

or more. Obtain fresh fuel.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 63 64

Comments to this Manuals

No comments

Great Dane GSRKA1934S User Manual Page 39

Comments to this Manuals

Related products and manuals for Lawnmowers Great Dane GSRKA1934S