Great Dane GSRKA1934S User Manual download pdf (Page 44)

GETTING QUALITY SERVICE

GETTING QUALITY SERVICE - 42

If oil is level is below ADD mark, ﬁll to proper

level.

If oil level is above the FULL mark, drain to

proper level.

Insert dipstick. Tighten cap.

Connect Battery

CAUTION: Avoid injury! Prevent Battery Explosions:

• Keep sparks, lighted matches, and open ﬂame away from

the top of battery. Battery gas can explode.

• Never check battery charge by placing a metal object

across the posts. Use a volt-meter or hydrometer.

• Do not charge a frozen battery; it may explode. Warm bat-

tery to 16 degrees C (60 degrees F).

Connect positive (red) cable to battery positive (+)

terminal. Install red terminal cover (A).

Connect negative (black) cable to battery negative (-)

terminal. Install black terminal cover (B).

Check Machine Safety Systems

Perform safety system check to make sure the electronic

safety interlock circuit is functioning properly.

Speciﬁcations

Engine

Note: See engine manufacturer’s owner’s manual provided

with your machine for engine speciﬁcations.

Drivetrain

Type........................................................ Dual Hydrostatic

Pumps.........Hydro-Gear PG-1KDA-D61 - PG-1HDA-D41

Wheel Motors..........................Hydro-Gear HGD-12-7172

Number of Speeds.................................Inﬁnitely Variable

Electrical System

Charging System..................................................15 Amp

Ignition................................................................Flywheel

Starter.........................................................Solenoid Shift

Fuel System

Fuel Type..............................Gasoline, Regular Unleaded

Fuel Tank Location...................On Right Side of Operator

Fuel Capacity ............................................22.7 L (6.0 gal)

Steering and Brakes

Steering.............................................Dual Control Levers

Steering..............................................................Hydraulic

Park Brake.....................................................Tire Contact

•

Tires

Rear.................................................................18 x 6.5 - 8

Front...................................................................11 x 4 - 5

Inﬂation Rear (Maximum)..............69–97 kPa (10–14 psi)

Inﬂation Front (Maximum)..........138–173 kPa (20-25 psi)

Battery

Voltage....................................................................12-volt

CCA.....................................................................270-amp

Reserve Capacity.............................................67 minutes

BCI Group Size.............................................................U1

Capacities

Fuel Tank......................................................18.9 L (5 gal)

Hydraulic Oil (With Filter) 3.1 L (3.3 qt.)

Engine Oil (With Filter) 1.9 L (2.0 qt.)

Travel Speeds at Full Engine RPM

Forward........................................0–14 km/h (0–8.7 mph)

Reverse..........................................0–6.4 km/h (0–4 mph)

Dimensions

Overall Height............................................1.47 m (47 in.)

Overall Length.........................................1.48 m (58.5 in.)

Overall Width (with chute up)....................... .89 m (35 in.)

Overall Width (with chute down).................1.19 m (47 in.)

Recommended Lubricants

Engine Oil.........................See Applicable Engine Manual

Hydraulic Oil................5W-50 or 15W-50 All Synthetic Oil

Grease: (This may change for high-speed applications such

as cutting units)

All-Purpose Grease with an NLGI Grade No. 2 Rating

(Speciﬁcations and design subject to change without

notice.)

Getting Quality Service

Service Literature

If you would like to order a copy of the Parts Catalog or

Operator Manual for this machine, contact your Great Dane

Dealer. Parts catalogs and operator manuals are also avail-

able online at Great Dane.com.

Parts

We recommend Great Dane quality parts available at your

Great Dane dealer.

Part numbers may change, use part numbers listed below

when you order. If a number changes, your dealer will have

the latest number.

When you order parts, your Great Dane dealer needs your

machine serial number and engine serial number. These

are the numbers that you recorded in the Product Identiﬁca-

tion section of this manual.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

Comments to this Manuals

No comments

Great Dane GSRKA1934S User Manual Page 44

Comments to this Manuals

Related products and manuals for Lawnmowers Great Dane GSRKA1934S