Great Dane GSRKA1934S User Manual download pdf (Page 16)

OPERATING

OPERATING - 14

Using the Hourmeter

NOTE: The machine is equipped with an electric start.

The hourmeter will continue to run with the key switch

in the run position.

Hourmeter (A) shows number of hours the machine

has been operated.

Use hourmeter and SERVICE INTERVAL section to

determine when machine needs service.

Using the Motion Control Levers

The functions of the motion control levers are:

CAUTION: Avoid injury! Learn use of the motion

control levers and practice at half throttle until

becoming proﬁcient and comfortable with the

operation of the machine.

Do not move motion control levers from forward

to reverse or reverse to forward position rapidly.

Sudden direction changes could cause loss of

control or damage the machine.

• Steering.

• Acceleration.

• Deceleration.

•

Neutral Position

Picture Note: Motion control levers (A) shown in the neutral

position.

Machine speed, motion and direction can be controlled

when the engine is running and park brake is unlocked.

Operator can exit the mower with the engine running

when the park brake is locked and the PTO switch is

disengaged.

Forward and Reverse Motion:

CAUTION: Avoid injury! Children or bystanders

may be injured by runover and rotating blades.

Before traveling forward or rearward:

Carefully check the area around the machine.

Disengage the mower before backing up.

Move throttle lever to the fast position.

Unlock park brake.

Push motion control levers forward to begin forward

motion. The further forward the control levers are

moved, the faster the machine will travel.

Forward speed range: 0–14 km/h (0–8.7 mph)

Pull both motion control levers rearward at the same

time to begin reverse motion.

Reverse speed range: 0–6.4 km/h (0–4 mph)

To stop motion, move both motion control levers for-

ward or rearward until the machine comes to a stop.

NOTE: The motion control linkages are adjust-

able. If adjustment is required, see Checking

and Adjusting Motion Control Linkages in the

SERVICE TRANSMISSION section.

•

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 63 64

Comments to this Manuals

No comments

Great Dane GSRKA1934S User Manual Page 16

Comments to this Manuals

Related products and manuals for Lawnmowers Great Dane GSRKA1934S