Great Dane GSRKA1934S User Manual download pdf (Page 28)

SERVICE TRANSMISSION

SERVICE TRANSMISSION- 26

Rotate speed control bar (A) to full forward position.

With engine off, move motion control levers (B) until

they contact the speed control bar (A). A slight deﬂec-

tion should be seen in the linkage rod (C).

NOTE: Check machine tracking after making adjust-

ments.

Start the engine and run until it reaches normal operat-

ing temperature.

CAUTION: Avoid injury! Be aware of

bystanders.

Stand on the operator’s platform and, with the park

brake released, move the motion control levers (B).

Observe wheel movement as motion control levers are

moved back and forth. Wheels should travel in the cor-

rect direction as the levers are moved.

Move motion control levers to neutral position. If rear

wheels continue to rotate, a return to neutral (RTN)

adjustment is required.

Adjusting Motion Control Return to Neutral (RTN)

Linkages:

CAUTION: Avoid injury! Fingers or loose

clothing can get caught in rotating parts. Stop

engine and wait for all moving parts to stop

before servicing.

Stop engine.

Lock park brake.

Lift machine with a safe lifting device centered under

rear tire support frame.

Start the machine with motion control levers in neutral.

Stand on the operator’s platform and release park

brake.

If rear wheels rotate when motion control levers are in

neutral, a neutral adjustment is required.

Stop engine.

�

Picture Note: engine removed for picture clarity.

Slightly loosen cap screw (A) to allow rotation of neutral

return plate.

If wheel is rotating forward, rotate neutral return plate

counterclockwise until wheel rotation stops.

If wheel is rotating in reverse, rotate neutral return plate

clockwise until wheel rotation stops.

Tighten cap screw (A).

Recheck neutral. If wheels continue to rotate, readjust.

With the engine running, operate the motion control

levers to verify adjustment.

If engine will not crank over after adjustments are

made, adjust the neutral switch.

Checking and Adjusting Transmission Tracking

CAUTION: Avoid injury! Engine exhaust fumes

contain carbon monoxide and can cause seri-

ous illness or death.

Move the machine to an outside area before

running the engine.

Do not run an engine in an enclosed area with-

out adequate ventilation.

Connect a pipe extension to the engine exhaust

pipe to direct the exhaust fumes out of the area.

Allow fresh outside air into the work area to

clear the exhaust fumes out.

•

NOTE: Check and adjust transmission tracking on a

hard, level surface.

•

10.

11.

•

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 63 64

Comments to this Manuals

No comments

Great Dane GSRKA1934S User Manual Page 28

Comments to this Manuals

Related products and manuals for Lawnmowers Great Dane GSRKA1934S